Method of application

Surface preparation

Surfaces must be clean, dry and free of dust, rust and grease. Bare metal must be suitably treated to enhance corrosion protection (e.g. bare steel, etc.).

Overlaying

SikaGard 6440 is applied by airless spray equipment with a working pressure of 3 - 6 bar, e.g. Sika SCP Gun (pressure type) or Sika UBC Gun (vacuum type). Shake approx. 40 times before use. Cover the elements adjacent to the field to be sprayed. Spray at room temperature, from a distance of approx. 25 cm, maintaining a cross-layer arrangement. Apply a continuous layer of material.

SikaGard 6440 does not drip when applied. Spray until the desired film thickness is obtained. When a thicker coat is required, the individual coats must be completely dry before the next application. Different surface textures can be obtained by changing the spraying technique.

Do not spray on parts of the engine, exhaust and brake systems.

Cleaning

The fresh layer of SikaGard 6440 is removed from tools and equipment with Sika Remover208 or other suitable product. After drying, SikaGard 6440 can only be removed mechanically. Hands and exposed skin should be cleaned immediately with Sika Handclean towels or a suitable industrial hand cleaner and water. Do not use solvents!

Painting

SikaGard 6440 can be overpainted after complete drying (approx. 24 hours) with commercially available paint systems. The drying time can be shortened by increasing the temperature to 60°C. Due to the different adhesion and compatibility of paints, it is necessary to carry out preliminary tests.

PRODUCT ADVANTAGES

• good resistance to road salt, scratches and impacts
• good grip
• does not run or drip
• painted with most systems
• the possibility of applying various structures
• does not contain heavy metals
• flexible after drying
• very good resistance to low temperatures