BOLL Polyester resin + glass mat for cavities

Set contains:

• 1 piece. - BOLL Polyester resin 1kg (970g resin + 30g hardener)
• 1 piece. - BOLL Glass mat (300g/m²) 0.5m²

BOLL Polyester resin is an agent which, in combination with a glass mat or fabric, is used to fill significant losses of material in car bodies, boats, trailers, etc. as well as to strengthen and stiffen the structure of repaired elements.

It has very good adhesion to metal, plastic surfaces, steel, glass and concrete. It is resistant to temperatures up to 80°C and is characterized by high elasticity and short curing time.

After hardening, it has high mechanical strength and can be covered with any polyester putties.

The mat in combination with the BOLL polyester resin is used to fill significant losses of material in car bodies, boats, trailers, etc. as well as to strengthen and stiffen the structure of the repaired elements.

HOW TO USE

Sand the damaged surface, clean and degrease. Cut the glass mat to the desired dimensions. Add the hardener to the required amount of resin (approx. 2-3%) and mix thoroughly. Within a maximum of 10 minutes (at 20°C) apply the resin to the cleaned area. Then apply and press the cut mat with a brush or roller and apply the resin again. After about 45 minutes the resin is fully cured.

If necessary, apply another layer on the still sticky surface.

NOTE: Do not pour the remaining resin/hardener mixture into the can.