BOSTIK FIXPRO Strong quick-drying adhesive, fast fixing

BOSTIK FIXPRO ULTRA QUICK AND STRONG ADHESIVE is designed for permanent fixing of heavy materials and those that after 15 minutes can be subjected to heavy loads. Compatible with most materials and substrates.

Capacity: 290ml

USAGE

• Bonding of various building materials and finishing and decorative elements, especially in vertical applications made of stone, ceramics, steel, etc.
• Prefabricated elements, concrete accessories, garden architecture, tiles (ceramic, cement), plasterboards, substructures, aluminum profiles, glass blocks, stucco (walls, ceilings), ceramic tiles, strips, window sills, thresholds, plinths, wall panels, insulation linings , furniture joinery, etc.

KEY BENEFITS

• EXTREME STRENGTH 367kg/10CM2
• HOLDS STRONGLY AFTER 15 MINUTES
• TOTAL DRYING TIME 60 MINUTES
• SLIGHTLY FLEXIBLE AFTER HARDENING
• OUTDOOR AND INDOOR
• RESISTANT TO MOISTURE AND WEATHER CONDITIONS
• NEUTRAL CURING SYSTEM
• DELICATE FRAGRANCE
• EXCELLENT ADHESION TO MOST BUILDING MATERIALS, WITHOUT PRIMER,
• HIGH DAMAGE RESISTANCE
• NON-CORROSIVE IN CONTACT WITH METALS

TYPES OF SURFACE
Very good adhesion to most building materials without priming, e.g. concrete, stone, plaster, screed, building ceramics, varnished or impregnated wood, MDF, HDF, cork, plywood, chipboard, enameled steel, stainless steel, aluminium, zinc, copper lead, glaze, terracotta, gres, glass, glass, sanitary ceramics, porcelain, PVC, PU, ​​HPL and hard plastics of a similar type.

SURFACE PREPARATION
The substrate must be clean and degreased. It can be slightly damp (dull damp, i.e. no standing water). In the case of absorbent substrates, gently sprinkling the surface with water mist will accelerate the setting of the adhesive. It is recommended to carry out an adhesion test before using on plastic substrates or paint coatings. For highly porous or highly absorbent surfaces, use Bostik Universal Primer T300. After priming wait min. 15 minutes (max. 4 hours) before applying the adhesive.

HOW TO USE
Apply on one side with parallel, vertical and thin stripes at small intervals (5-10 cm - depending on the size and weight of the glued elements and approx. 5 cm from the edge). Recommended size of adhesive strips - 3 mm thick, 5 mm wide (provided that the surfaces are even and well fitted). Then connect and press firmly. Do not apply on points. Vertically glued elements should be supported or otherwise secured against displacement for 15 minutes after application. After approx. 15 minutes, the support can be removed (applies to +23°C and 50% RH conditions). Ensure effective ventilation. The curing rate of the product depends on the ambient temperature and air humidity. As temperature and humidity levels increase, the polymerization process proceeds faster.

WEAR
With adhesive strips 5 mm wide and 3 mm thick, the yield from one 290 ml package is approx. 14 m of adhesive track.

Szczegółowe informacje w Karcie Informacyjnej Produktu*
^{*(Otwarcie w nowym oknie z oficjalnej strony producenta)}