BOSTIK H910 Strong, quick-drying adhesive for joints up to 2mm

Capacity: 290ml

White color

SUPERGRIP FAST CURE H 910 is a one-component, hybrid, solvent-free assembly adhesive with a uniquely short setting time, for general construction and industrial applications, indoors and outdoors. Ideal for fixing heavy construction materials or finishing elements that they must be subjected to load quickly after gluing .

ADVANTAGES

• Glue within 15 minutes is obtained from the application 80% its final strength
• Glued elements require immobilization, and in the case of heavy materials support only for 15 minutes from application
• Total drying time 1 hour (provided that the application is in accordance with the manufacturer's recommendations)
• High bonding strength and mechanical resistance
• Resistant to moisture and weather conditions
• Economical and efficient to use (application with thin strips with a maximum thickness of 2 mm)

TYPES OF SURFACE

Very good adhesion to most building materials without priming, e.g. concrete, stone, plaster, screed, building ceramics, varnished or impregnated wood, MDF, HDF, cork, plywood, chipboard, enameled steel, stainless steel, aluminium, zinc, copper lead, glaze, terracotta, gres, glass, glass, sanitary ceramics, porcelain, PVC, PU, ​​HPL and hard plastics of a similar type.

WEAR

With adhesive strips 5 mm wide and 3 mm thick, the yield from one 290 ml package is approx. 14 m. glue track.

USAGE

• Bonding of various building materials and finishing and decorative elements, especially in vertical applications made of stone, ceramics, steel, etc.
• Prefabricated elements, concrete accessories, garden architecture, tiles (ceramic, cement), plasterboards, substructures, aluminum profiles, glass blocks, stucco (walls, ceilings), ceramic tiles, strips, window sills, thresholds, plinths, wall panels, insulation linings , furniture joinery, etc.

APP

SURFACE PREPARATION

The substrate must be clean and degreased. It can be slightly damp (dull damp, i.e. no standing water). In the case of absorbent substrates, gently sprinkling the surface with water mist will accelerate the setting of the adhesive. It is recommended to carry out an adhesion test before using on plastic substrates or paint coatings. For highly porous or highly absorbent surfaces, use Bostik Universal Primer T300. After priming wait min. 15 minutes (max. 4 hours) before applying the adhesive.

HOW TO USE

Apply on one side with parallel, vertical and thin stripes at small intervals (5-10 cm - depending on the size and weight of the glued elements and approx. 5 cm from the edge). Recommended size of adhesive strips - 3 mm thick, 5 mm wide (provided that the surfaces are even and well fitted). Then connect and press firmly. Do not apply on points. Vertically glued elements should be supported or otherwise secured against displacement for 15 minutes after application. After approx. 15 minutes, the support can be removed (applies to +23°C and 50% RH conditions). Ensure effective ventilation. The curing rate of the product depends on the ambient temperature and air humidity. As temperature and humidity levels increase, the polymerization process proceeds faster.

CLEANING

Fresh soiling can be removed with Bostik Universal Cleaner T100. Cured material can only be removed mechanically. Use special Bostik Cleaning Wipes T150 for hand cleaning.