BOSTIK H910 Strong, quick-drying adhesive for joints up to 2mm
32,11 zł netto
32,11 zł netto
SUPERGRIP FAST CURE H 910 is a one-component, hybrid, solvent-free assembly adhesive with a uniquely short setting time, for general construction and industrial applications, indoors and outdoors. Ideal for fixing heavy construction materials or finishing elements that they must be subjected to load quickly after gluing .
ADVANTAGES
TYPES OF SURFACE
Very good adhesion to most building materials without priming, e.g. concrete, stone, plaster, screed, building ceramics, varnished or impregnated wood, MDF, HDF, cork, plywood, chipboard, enameled steel, stainless steel, aluminium, zinc, copper lead, glaze, terracotta, gres, glass, glass, sanitary ceramics, porcelain, PVC, PU, HPL and hard plastics of a similar type.
WEAR
With adhesive strips 5 mm wide and 3 mm thick, the yield from one 290 ml package is approx. 14 m. glue track.
USAGE
SURFACE PREPARATION
The substrate must be clean and degreased. It can be slightly damp (dull damp, i.e. no standing water). In the case of absorbent substrates, gently sprinkling the surface with water mist will accelerate the setting of the adhesive. It is recommended to carry out an adhesion test before using on plastic substrates or paint coatings. For highly porous or highly absorbent surfaces, use Bostik Universal Primer T300. After priming wait min. 15 minutes (max. 4 hours) before applying the adhesive.
HOW TO USE
Apply on one side with parallel, vertical and thin stripes at small intervals (5-10 cm - depending on the size and weight of the glued elements and approx. 5 cm from the edge). Recommended size of adhesive strips - 3 mm thick, 5 mm wide (provided that the surfaces are even and well fitted). Then connect and press firmly. Do not apply on points. Vertically glued elements should be supported or otherwise secured against displacement for 15 minutes after application. After approx. 15 minutes, the support can be removed (applies to +23°C and 50% RH conditions). Ensure effective ventilation. The curing rate of the product depends on the ambient temperature and air humidity. As temperature and humidity levels increase, the polymerization process proceeds faster.
CLEANING
Fresh soiling can be removed with Bostik Universal Cleaner T100. Cured material can only be removed mechanically. Use special Bostik Cleaning Wipes T150 for hand cleaning.