Skip to content
Same-day shipping before 13:00 CET!
On January 13th 2023 our store is closed. Sorry for the inconvenience.

Sika Repair 20F for concrete repair and leveling 25kg

by Sika
Original price 119,90 zł - Original price 119,90 zł
Original price
119,90 zł
97,48 zł netto
119,90 zł - 119,90 zł
Current price 119,90 zł
97,48 zł netto

Stock Available: 4

ikona dostawy Delivery: starts from 11,99 zł - [More]

Sika Repair 20F for repairing and leveling concrete

Sika Repair 20F mortar is product for repairing and leveling concrete . It is a single-component PCC mortar based on polymer-modified cement . It contains within itself addition of microsilica and is reinforced with synthetic fibers. The mortar is primarily used for manual reprofiling and leveling of rough concrete surfaces. As a result, a layer from 4mm to 20mm when applied to the entire surface and up to 40mm when filling local cavities.

Capacity : 25kg

Features:

  • Non-toxic material
  • Increased resistance to penetration by water and chlorides
  • Product with high resistance to sulphate corrosion
  • Good strength, waterproof and frost-resistant features
  • Compensation for early shrinkage thanks to the addition of synthetic fibers
  • Good adhesion without the use of a bonding layer
  • Ease of obtaining perfectly cosmetic surfaces
  • Easy to prepare
  • Easy to apply

What is the use of 20F putty?

Putty for repairing and leveling concrete Sika Sepair 20 F is intended for structural and non-structural repairs by hand. It is ideal for concrete exposed to increased environmental aggression. It has its uses in general construction and hydrotechnical construction .

How to apply mortar correctly?

Sika Repair 20F can be applied using traditional techniques. Of course, you can apply the mortar by hand or wet spraying . Please remember that the substrate should be matt and damp before applying the mortar. While the bonding layer is applied Sika Repair 10F onto the previously prepared substrate with a stiff brush apply it to the surface with a rubbing motion . Apply Sika Repair 20F mortar onto the fresh bonding layer using a trowel or trowel. The layer must be pressed to the substrate and then removed with a shearing movement. If the use of Sika Repair 10F is not necessary, the 20F mortar is applied in this way on a matt-damp substrate.

PRODUCT INFORMATION

  • Chemical base: Cement, polymer, microsilica, synthetic fibers, selected aggregate, special additives
  • Packing: 25 kg bags
  • Appearance / Color: Gray powder

INFORMATION ABOUT THE APPLICATION

Mixing proportions

Sika® Repair-20 F : water - 100 : 14 by weight 3.5 liters of water per 25 kg bag. To increase the stickiness and stability of the mortar (e.g. in a vertical, hanging or ceiling position), the amount of water can be reduced to approx. 3.25 liters per 1 25 kg bag.

Wear

Theoretical consumption: ~18.5 kg/m²/cm. Practical consumption depends on the roughness of the substrate, application method and losses during application.

Layer thickness

Minimum 0.5 cm / Maximum 1.5 cm - leveling mortar. When repairing small local defects - maximum 3.0 cm.

Waiting time / Repainting

The minimum technological break before applying any subsequent layers is (at +20°C):

  • for Sika® Repair-30 F: minimum 12 hours
  • for one-component Sikagard® coatings: minimum 5 days
  • for two-component coatings such as Icosit® and Sikafloor®: not less than 7 days and not earlier until the material moisture drops to below 4%

Szczegółowe informacje w Karcie Informacyjnej Produktu*
*(Otwarcie w nowym oknie z oficjalnej strony producenta)

Additional information

Have additional questions?

Contact us!

Buy cheaper

For selected products, the discount is calculated automatically based on the quantity in the cart!

Returns

Time to withdraw from the contract: 14 days

(detailed rules for returning products can be found in the tab: return of goods)

Complaints

Time for a warranty claim: 2 years

(warranty excluded for entrepreneurs to the extent permitted by law)