SikaTack Go4it - Glass adhesive 4h 300ml

SCOPE OF APPLICATION

SikaTack® Go4it! is intended for replacing car windows. For other applications, tests must be performed with actual substrates and conditions to ensure adhesion and material compatibility.

APPLICATION METHOD

Surface preparation

Surfaces must be clean, dry and free from grease, oil, dust and dirt. Bonding surfaces should be prepared according to the Sika Black-Primerless or All Black process. More information on the processes and use of surface preparation agents can be found in the relevant product data sheets. Glass without ceramic coatings requires appropriate protection against UV radiation.

App

It is recommended to apply the glue using a piston gun. SikaTack® Go4it! can be applied using high-quality hand-held application guns.

Please note that the viscosity of the product increases at low temperatures. To facilitate application, store the glue at room temperature before use. To ensure uniform joint thickness, it is recommended to apply the adhesive in the form of a triangular path.

The open time is much shorter in hot and humid climates. The glass must always be glued before the open time expires. Never glue glass if the adhesive has formed a skin.

Removal

Uncured SikaTack® Go4it! can be removed from tools and equipment with Sika® Remover-208 or other suitable solvent. Once hardened, the material can only be removed mechanically. Hands and exposed skin should be washed immediately using hand towels such as Sika® Cleaner350H or a suitable industrial hand cleaner and water. Do not use solvents on the skin