SikaTack Drive - Glass adhesive (60min) 600ml

PRODUCT ADVANTAGES

• 60-minute Minimum Departure Time per FMVSS 212 / 95th percentile dummy
• Supports fast, robust ADAS calibration
• Compatible with all car brands thanks to Sika's all-in-one modulus technology
• Compatible with Sika bonding processes
• Black Primerless and All Black
• Automotive OEM quality

SCOPE OF APPLICATION

Sika Tack® DRIVE (60 min) is for experienced professional users only.

Information provided applies to windshield replacement applications. For other applications, tests with actual substrates and conditions must be performed to ensure adhesion and material compatibility.

APPLICATION METHOD

Surface preparation

Surfaces must be clean, dry and free of grease, oil, dust and dirt.

Bonding surfaces must be prepared in accordance with the Sika Black-Primerless or All Black installation process. For more information on application and surface preparation, please refer to the relevant product data sheet. Glass without ceramic coatings requires adequate protection against UV radiation.

App

SikaTack® DRIVE (60 min) can be applied between 5 °C and 35 °C (ambient and product) but changes in reactivity and application properties must be considered. The optimum temperature of the substrate and adhesive is between 15°C and 25°C.

It is recommended to apply SikaTack® DRIVE (60 min) with a battery or pneumatic piston gun. Please note that the viscosity of the product increases at low temperature. In order to facilitate application, the adhesive should be stored at room temperature before use.

To ensure a uniform thickness of the joint, it is recommended to apply the adhesive in the form of a triangular bead.

The open time is much shorter in hot and humid climates. The glass must always be glued within the open time.

Never glue the glass if the glue has built up a skin.

Removal

Uncured SikaTack® DRIVE (60 min) can be removed from tools and equipment with Sika® Remover-208 or other suitable solvent. After curing, the material can only be removed mechanically. Hands and exposed skin should be washed immediately with hand towels such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on the skin!