BOSTIK P360 Seal'N'Flex polyurethane sealant 600ml
32,11 zł netto
32,11 zł netto
SEAL'N'FLEX MULTI PURPOSE P360 is a permanently elastic polyurethane sealant for structural joints and expansion joints, including façade and floor joints. The application includes external sidewalks and internal passages, surfaces loaded with pedestrian traffic, surfaces on which trolleys move, balconies, terraces, warehouses. It enables sealing of external wall joints, joints around the perimeter of windows and doors in building structures and on internal front surfaces.
The product also works well in the automotive industry (bodywork, sealing of welded or welded joints of metal elements: sewers, light fittings, roof, windows and other elements of the car body).
TYPES OF SURFACE
Very good adhesion to most building materials, e.g. concrete, plaster, screed, building ceramics, varnished or impregnated wood, enamelled steel, stainless steel, aluminium, tiles, terracotta, stoneware, PVC and similar types of plastics.
100 ml / 1 m of grout with a cross-section of 10 mm x 10 mm = 100 mm².
By multiplying the joint width (mm) by the joint depth (mm) we get the number of milliliters / 1 m.
The substrate must be dry, clean and degreased. It is recommended to carry out an adhesion test before using on plastic substrates or paint coatings. For porous or absorbent surfaces, use Bostik Universal Primer T300. After priming wait min. 15 minutes (max. 4 h) before applying the mass.
Concrete must be fully cured and seasoned. Sealed floors, screeds, underlayments and other similar types of surfaces must be insulated against the negative impact of water. If necessary, first fill the gaps with a foam expansion cord. Place the cord in the slot to the required depth carefully so as not to damage it. In the case of shallow gaps where there is no room for the cord, cover the bottom of the gap with PE tape to avoid three-way contact. The edges of the gap can be covered with masking tape to avoid dirt. The tape should be removed immediately after applying the mass and shaping its surface. Use Bostik Finishing Soap T500 to smooth the joint surface. The grout should have a shape that allows water to flow freely over it.
HOW TO USE
Apply the mass slowly, carefully filling the entire cross-section of the gap, so as not to close the air in it. Profile the mass surface with a spatula and smooth it within 15 minutes of application. The curing rate of the product depends on the ambient temperature and air humidity. As temperature and humidity levels increase, the polymerization process proceeds faster. In addition, the curing time depends on the cross section of the joint. Provide effective ventilation until the grout is fully cured.
Fresh soiling can be removed with Bostik Universal Cleaner T100. Cured material can only be removed mechanically. Use special Bostik Cleaning Wipes T150 for hand cleaning.