BRUNOX Epoxy rust neutralizer 2in1 100ml
19,92 zł netto
19,92 zł netto
Rust remover and epoxy primer in one
Rust removal and corrosion prevention system. Application and operation as:
Brunox® Epoxy is a patented epoxy based rust removal system.
The transparent, amber-colored liquid forms an organic iron compound with the neutralized corrosion layer. The resulting black, very compact and resistant layer provides long-term anti-corrosion protection and, thanks to the content of epoxy resin, is also an excellent priming layer.
This preparation is ideal for the renovation of machines, installations and vehicles. Thanks to particularly good penetration into pores caused by corrosion and perfect formation of a protective layer (no traces of brush strokes), excellent efficiency and the possibility of applying various coatings (paints, varnishes, putties - also chemically hardened) are ensured.
Wherever iron and steel rust occurs - indoors and outdoors. Not suitable for underwater use.
Ideal temperature: room temperature 20°C. Do not use BRUNOX® Epoxy below 10°C.
Preparation of areas affected by rust
Remove loose rust, dirt and paint residues (wire brush, sandpaper, sander, water or sandblasting), degrease.
In addition, steel cleaned of rust must be free of dust and grease (blow dust off or remove with a cloth dampened with water, degrease).
ATTENTION! Compressed air may contain oils that can cause adhesion problems!
ATTENTION! Do not use any solvents, thinners or silicone to prepare the surface!
Pour the required amount into the working container. Do not pour unused excess back into the original can! Excess for later use should be stored separately in an airtight container.
Apply with a brush 2-3 layers of the preparation on the corroded surface at intervals of min. 1 hour
After complete drying (24h), apply a topcoat.