HYPERDESMO transparent waterproofing set: bathroom, terrace, balcony
784,55 zł netto
784,55 zł netto
The estimated efficiency of the set is 4m² .
A set of products for transparent waterproofing on ceramic and stone tiles:
One-component colorless primer for smooth surfaces under Hyperdesmo liquid polyurethane membranes
One-component primer, colorless, non-staining, designed specifically for use with the transparent liquid polyurethane membrane HYPERDESMO®-T.
PRIMER-T is a one-component primer, colorless , non-staining, designed specifically for use with the transparent liquid polyurethane membrane HYPERDESMO®-T. Although it is dedicated to the system for transparent waterproofing/renovation of terraces, it can also be used with other membranes from the HYPERDESMO® line. PRIMER-T is easy to apply by rubbing the preparation into the substrate with a clean cloth. After 10-15 minutes, the substrate is ready for the application of the liquid membrane.
TRANSPARENT FULLY ALIPHATIC LIQUID POLYURETHANE RESIN FOR WATER INSULATION, PROTECTION AND BINDING OF SAND, GRAVEL AND DECORATIVE STONES
HYPERDESMO®-T is a one-component liquid transparent waterproofing membrane that sets under the influence of moisture in the atmosphere. After setting, it creates a highly plastic, hydrophobic coating with high durability and UV resistance. It is aliphatic and does not undergo any changes under the influence of sunlight.
The membrane is based on pure elastomeric, hydrophobic, aliphatic polyurethane resins, thanks to which it has excellent mechanical, chemical, UV and all environmental factors resistance.
HYPERDESMO®-T creates the appearance of a colored product, especially when stored in large containers. However, the product is completely transparent.
Transparent waterproofing and protection:
Tying sand/stone carpets.
The product is also used for sealing concrete and masonry.
FEATURES AND BENEFITS
Application with a roller in one, two or three (depending on the angle of the surface) layers with a minimum total consumption of 0.8-1.0 kg/m2.
Product designed for application on:
Ceramic tiles, glass, concrete, cement roofing, wood, corroded metal, galvanized steel, polycarbonate.
Standard requirements for a concrete base:
Selection of primer for non-standard surfaces: According to the primer selection table
Two-component aliphatic polyurethane protective layer
Synthetic matte finish
Capacity : 0.96kg (0.16+0.80)
Two-component, fully aliphatic topcoat with increased chemical and mechanical resistance parameters
AQUASMART® –TC 2K Floor Protect is a two-component, water-based, aliphatic coating with unique properties that make the product suitable for many applications. The product is recommended for the protection of, among others, self-leveling polyurethane and epoxy floors. AQUASMART® –TC 2K Floor Protect shows excellent UV, chemical and physical resistance. The coating is very resistant to dirt. It can be easily colored with water-soluble pigments in a proportion of 5-10% by weight, depending on the required coverage.
Application with a roller at a consumption of 150-300 gr/m2
FEATURES AND BENEFITS:
Clean the substrate, e.g. using a high-pressure washer. Remove any substances that may reduce the bond strength of the coating to the substrate, such as wax, grease and other dirt.
Mixing: Use a low speed (300 rpm) mixer. Add the second ingredient and continue mixing for another few minutes.
Application: Application by roller or spray. After applying the coating, avoid rolling as traces may remain. Additional rolling on the surface of the coating when it has already partially set may damage the structure. Before applying the next layer, make sure that the coating has completely set.
Minimum consumption 150 gr/m2 in one or two layers.