Skip to content
Same-day shipping before 13:00 CET!
On January 13th 2023 our store is closed. Sorry for the inconvenience.

HYPERDESMO roof sealing repair kit

Sold out
Original price 1.469,00 zł - Original price 1.469,00 zł
Original price
1.469,00 zł
1.194,31 zł netto
1.469,00 zł - 1.469,00 zł
Current price 1.469,00 zł
1.194,31 zł netto
ikona dostawy Delivery: starts from 11,99 zł - [More]

Roof sealing repair kit

A set of products for waterproofing. Top coating in WHITE (COLOR RECOMMENDED BY THE MANUFACTURER) or GRAY - in the gray option, please add the note "GRAY COLOR" when ordering).

The estimated capacity of the set is 9m².

  • Geodesmo-50 Primer – 3 liters
  • Hyperdesmo Classic membrane – 12 kg, brick red or gray
  • Hyperdesmo ADY610 membrane – 6 kg, white
  • white Hyperseal mass for filling gaps and cavities
  • polyester geotextile – 3 m²


Polyurethane primer for general use

Capacity : 1L

A fast-setting, one-component, polyurethane-based universal primer used for a wide range of substrates before the application of Hyperdesmo and Aquasmart products.

GEODESMO-50 is a single-component, polyurethane-based universal primer used for all types of surfaces. It can be successfully used on porous and smooth, absorbent and non-absorbent surfaces. It is characterized by low viscosity and balanced setting time, resulting in easy application and short application time of the next coating on any type of surface, both very porous, medium and smooth (e.g. glass and metals). Moreover, it can be effectively used on both dry and wet concrete, not only as a primer but also as an economical impregnation agent, additionally increasing the resistance of concrete. Application with a brush or roller.

Consumption : 100-500 gr/m2, depending on porosity and absorbency.


Surface priming before applying Hyperdesmo family membranes:

  • universal primer, porous and smooth, absorbent and non-absorbent surfaces
  • also used as an impregnation

Alchimica HYPERDESMO Classic

Liquid waterproofing membrane

Capacity : 6kg

Color :teja (brick red)

HYPERDESMO®-CLASSIC is an easy-to-use waterproofing and protection method. It is a one-component liquid polyurethane membrane, which bonds by reaction with air humidity. The obtained membrane is characterized by high flexibility and strong adhesion to many types of surfaces.

HYPERDESMO-CLASSIC is based on pure elastomeric hydrophobic polyurethane resins, which provide excellent mechanical, chemical, thermal properties and UV resistance.

Application using a brush, roller or airless spray in two layers. Recommended consumption is a minimum of 1.2-1.5 kg/m2 (in two layers of 0.6-0.75 kg each).


  • Waterproofing and protection:
  • Waterproofing and renovation of flat roofs
  • Gypsum and cement boards
  • Repair of asphalt/bitumen coverings
  • Renovation of EPDM, PVC, TPO/FPO membranes
  • Waterproofing under terrace tiles/decks
  • Verandas and balconies
  • Light metal or cement board roofs


Not recommended use:

  • on brittle surfaces
  • waterproofing of tanks with chemically treated water

Application of a dark-colored membrane in a place with strong exposure to UV requires the use of HYPERDESMO-ADY-E.


  • Excellent resistance to weather conditions and UV
  • High reflectivity of sunlight (reduces heating of the structure)
  • High thermal resistance, the product never softens. Operating temperature up to 80oC, shock temperature 200oC
  • Resistance to low temperatures. The membrane film retains its properties at temperatures < -40oC
  • Excellent mechanical resistance
  • Crack bridging
  • Good chemical resistance
  • Vapor-permeable. No moisture accumulation under the surface


  • First layer: 0.6-0.8 kg/m2
  • Second layer: 0.6-0.9 kg/m2
  • Minimum total consumption: 1.2-1.5kg/m2


The product can be applied, among others: for: concrete, mosaics, roof asbestos boards, old but well-adhering acrylic and bitumen coatings, wood, corroded metals, galvanized steel. Requirements for concrete parameters:

  • Hardness: R28 = 15Mpa
  • Humidity: W < 10%
  • Temperature: 5-35oC
  • Relative humidity: < 85%

Selection of primer for specific applications: in accordance with the Primer Selection Table.


Clean the surface, if possible using a high-pressure washer. Remove fatty substances from the surface - grease and wax. The surface should also be cleaned of cement laitance, loose particles, mold release agents or loose fragments of old coatings. Sand down any sharp edges.


Select the appropriate primer and prime it in accordance with its technical data sheet.

Mixing the ingredients:

Mix with a mixer at 300 rpm. Optionally, dilute the product with 5-10% SOLVENT01.

When applying with low-power airless spray, SOLVENT-01 can be added to the liquid membrane to dilute it (up to 10% by weight).


Apply the product with a brush, roller or spray in two layers. For additional durability, apply a third layer.

Alchimica HYPERDESMO ADY 610

One-component, non-yellowing (100% aliphatic), highly elastic polyurethane liquid membrane

HYPERDESMO ADY610 is a fully aliphatic, one-component, liquid polyurethane membrane. After hardening, it creates a highly flexible, non-yellowing waterproofing coating that is resistant to pedestrian traffic.

The product was developed for investments requiring a stable color of the coating applied in one layer. Application of the membrane in one layer results in faster project implementation and allows you to minimize errors related to the bond strength of the interlayers.

Capacity : 6kg
White color

HYPERDESMO A610 is a single-component product with a good viscosity profile over a wide temperature range. When applied in one layer at the recommended consumption, it creates a bubble-free, uniform waterproofing membrane. The product maintains a stable color even in dark colors. It maintains high solar reflectivity parameters throughout its entire service life when used in white.

Application by roller or airless spray.

Consumption : 1.5 – 2 kg/m2 depending on the porosity of the substrate


HYPERDESMO®-ADY 610 is CE certified as a product part of the HYPERDESMO® system ensuring increased UV resistance and color stability.


  • Waterproofing of new flat roofs
  • Renovation of roofing made of felt, PVC, TPO/FPO
  • Waterproofing of verandas, balconies and terraces
  • Waterproofing and UV protection of thermal insulation made of closed-cell polyurethane foam
  • Waterproofing of lightweight roofs made of sheet metal/sandwich panels/fiber cement


Not recommended use:

  • Non-load-bearing substrates
  • Waterproofing of swimming pools and chemically treated water tanks


  • Excellent resistance to weather conditions and UV radiation (100% aliphatic)
  • Low viscosity
  • Excellent mechanical resistance, high flexibility, resistance to stretching and tearing
  • Strongly hydrophobic
  • Excellent chemical and hydrolysis resistance.


The product can be successfully used on:

Concrete/steel-reinforced or other concrete, fiber cement, ceramic/stoneware tiles, cement roof tiles, old (but well-adhering) acrylic and asphalt/bituminous coatings, wood, corroded metal and galvanized steel.

Requirements for concrete parameters:

  • Hardness: R28 = 15Mpa
  • Humidity: W < 10% (dielectric method)
  • Temperature: 5-35oC
  • Relative humidity: < 85%

Selection of primer: According to the Primer Selection Table.


GEOTEXTILE-50 PRESSED is a non-woven polyester geotextile with a grammage of 50 gr/m2, produced in the water needling process (hydrodynamic braiding).

Additional information

Have additional questions?

Contact us!

Buy cheaper

For selected products, the discount is calculated automatically based on the quantity in the cart!


Time to withdraw from the contract: 14 days

(detailed rules for returning products can be found in the tab: return of goods)


Time for a warranty claim: 2 years

(warranty excluded for entrepreneurs to the extent permitted by law)