Permanently elastic, acetic acid-crosslinking silicone rubber for sealing and elastic filling of connection and expansion joints.
- In sanitary rooms and underwater areas
- Limits the development of fungi in accordance with the PN-EN ISO 846 standard
- Resistant to weather conditions, aging process and UV radiation
- Very good machining properties
- High adhesion to ceramic tiles
- Approved for contact with food*)
- EMICODE® license according to GEV: EC1PLUS very low emissions PLUS
- Indoors and outdoors
Sopro sanitary silicone is a ready-to-use, acetic acid-curing, fungus-reducing silicone sealing material, designed for flexible filling of connection and expansion joints in sanitary rooms, also between tile coverings and a bath tub, shower tray, washbasin or sink, toilet bowl, urinal, etc.
For grouting gaps in door and window frames, corners and joints between wall and floor coverings indoors, in underwater areas (with Sopro UW 025 primer), indoors and outdoors.
Sopro Silicon bonds many types of substrates without the need for a primer. On absorbent substrates, the adhesion of sanitary silicone can be increased by using the Sopro P 4050 primer. Clean the substrates, e.g. board edges, apply Sopro P 4050 with a brush to the edges of the cladding and allow it to evaporate. Sopro Silicon should be built into the joint gaps within 5 hours after applying the primer.
Without primer : glass, cladding tiles and double-sided tiles, polyester plastic, fiberglass reinforced, epoxy varnishes, PVC, alkyd varnishes, aluminium, acrylic plastics.
With Sopro P 4050 : concrete, aerated concrete, plaster, masonry.
With Sopro SPM 022: stainless steel, galvanized steel, galvanized chrome, anodized aluminum, enamels, solvent-based varnish coatings, PVC.
Due to the variety of substrates and the possibility of mutual interactions, we recommend carrying out a trial grouting.
Layer formation time epidermal: Approx. 10 minutes
Curing/crosslinking: Approx. 2mm/24 hours.
thermal resistance: From -30°C to +180°C
Application temperature From +5°C to +35°C (substrate, material, air).
Wear: 3.1 m/container, with a width of 10 mm and a joint depth of 10 mm
Szczegółowe informacje w
Karcie Informacyjnej Produktu*
*(Otwarcie w nowym oknie z oficjalnej strony producenta)